Ingeniería y Construcción · E.13 · 22 min de lectura
Poroelasticidad 3D de Biot, Acoplamiento de Skempton y Margen de Deslizamiento de Fallas en Almacenamiento de CO2
Continuación de los Folios E.01 y E.05: estudio geomecánico ilustrativo que acopla el coeficiente de Biot α = 1 − K_d/K_s, la respuesta no drenada de Skempton B de Rice–Cleary y la tendencia de deslizamiento de Mohr–Coulomb entre cuencas sedimentarias y basamento cristalino.
Por qué importa
Como una esponja rígida de piedra prensada bajo dos kilómetros de roca, un yacimiento profundo reparte el peso entre sus granos y el fluido de sus poros; mantener la presión de inyección bajo el umbral de fricción evita deslizar fallas en el modelo del folio.
Conceptual Vision Plate E.13-V (Imagining What It Would Look Like) · Artistic geological cutaway imagining an intact arching caprock over a porous sandstone storage reservoir and a dipping crystalline basement fault. Exact geometry, specifications, and governing equations are kept strictly intact in deterministic Plate E.13-A and Plate E.13-B below.
Sobre esta ilustraciónThis AI-generated illustration is imagining what the concept would look like: an artistic impression, not a measured structure or specification. Exact geometry, specifications and governing equations are kept strictly intact with zero artistic interpretation in deterministic Plate E.13-A and Plate E.13-B below.Sinopsis Ejecutiva en Español · Folio E.13
Actos I y II — Historia, ley gobernante e intuición cotidiana:Poroelasticidad 3D de Biot, Acoplamiento de Skempton y Margen de Deslizamiento de Fallas en Almacenamiento de CO2 — Continuación de los Folios E.01 y E.05: estudio geomecánico ilustrativo que acopla el coeficiente de Biot α = 1 − K_d/K_s, la respuesta no drenada de Skempton B de Rice–Cleary y la tendencia de deslizamiento de Mohr–Coulomb entre cuencas sedimentarias y basamento cristalino. Este monográfico interactivo verifica la ley gobernante α = 1 − K_d / K_s · Δp_u = +B Δσ_mean · |τ| / (σ_n − α_fault(p_0 + Δp_inj)) < μ_f. Por qué importa en la vida real: Como una esponja rígida de piedra prensada bajo dos kilómetros de roca, un yacimiento profundo reparte el peso entre sus granos y el fluido de sus poros; mantener la presión de inyección bajo el umbral de fricción evita deslizar fallas en el modelo del folio.
En Palabras Sencillas (Explicación Accesible): En palabras sencillas, la roca profunda del subsuelo no es un tanque hueco, sino una esponja dura de arenisca aplastada por kilómetros de estratos encima. Cuando los ingenieros inyectan dióxido de carbono comprimido o agua en sus poros microscópicos, la presión del fluido empuja hacia afuera y reduce la fuerza que mantiene apretadas las fallas geológicas. Mientras la fricción lateral (razón de esfuerzos k_0) supere ese empuje, la falla permanece estable en el modelo; si la presión alcanza una falla frágil ya cercana a su límite, la fricción puede ceder y disparar microsismos.
Mecanismo Técnico, Fuerzas en Competencia y Umbral Crítico: En la poroelasticidad isotrópica de Biot (1941, DOI 10.1063/1.1712886; Biot y Willis 1957, DOI 10.1115/1.4011606), una arenisca porosa con módulo drenado K_d = 12.0 GPa y módulo mineral K_s = 36.0 GPa tiene coeficiente α = 0.667. Bajo la formulación de Rice y Cleary (1976, DOI 10.1029/RG014i002p00227) y Skempton (1954, DOI 10.1680/geot.1954.4.4.143) con convención positiva en compresión (Δp_u = +B Δσ_mean), la porosidad φ = 0.20 y salmuera (K_f = 2.2 GPa) dan B = 0.394, mientras que CO2 supercrítico (K_f = 0.20 GPa) reduce B a 0.053. En una falla sin cohesión con α_fault = 1.0 y fricción μ_f = 0.60, una cuenca sedimentaria (k_0 = 0.72) soporta Δp_crit = 9.40 MPa (τ/σ'_n = 0.404 a Δp_inj = 4.5 MPa), en tanto que un basamento críticamente esforzado (k_0 = 0.60) cae a Δp_crit = 0.57 MPa (τ/σ'_n = 0.825). El modelo reporta η_poro = 0.444 de forma pasiva y mantiene σ_h = k_0 σ_v desacoplado de Δp_inj. La hipótesis de nivel T1–T2 de estabilidad sedimentaria queda falsada si la sobrepresión alcanza fallas de basamento (Zoback y Gorelick 2012, DOI 10.1073/pnas.1202473109; Ellsworth 2013, DOI 10.1126/science.1225942), si σ'_n ≤ 0 o si el acoplamiento poroelástico completo eleva |τ|/σ'_n ≥ μ_f.
Acto III — Laboratorio interactivo: los deslizadores en tiempo real y las cuatro lentes del observatorio (superficie 3D, retrato de fase, listón de conservación y radar polar) permiten explorar los umbrales críticos directamente en el navegador.
Actos IV y V — Descubrimiento y fuentes: la narrativa completa y las fuentes primarias siguen abajo (en inglés). Investigación científica y educativa abierta, no consejo médico.
Act I — Cool Fact & Human Story: Why Rock Grains Share the Load When Fluid Is Pumped Underground
In 1925, Karl Terzaghi explained how a saturated clay settles by assuming that every mineral grain and every drop of pore water is completely rigid, so fluid carries all of a sudden load before slowly draining away (Folio E.05). Sixteen years later, in 1941, the Belgian-American applied physicist Maurice Anthony Biot asked what happens in three dimensions when the porous rock skeleton itself is stiff—like deep sandstone—and both the solid mineral grains and the pore fluid compress under stress (Journal of Applied Physics, DOI 10.1063/1.1712886). Biot wrote down a linear three-dimensional theory of consolidation in which fluid pressure and solid elastic strain are two halves of one coupled system. In 1954, Alec Skempton measured how much undrained pore pressure jumps when confining stress rises on soils and rocks (Géotechnique, DOI 10.1680/geot.1954.4.4.143), and in 1957 Biot and Willis identified the measurable elastic coefficients linking bulk rock stiffness K_d to solid grain stiffness K_s (Journal of Applied Mechanics, DOI 10.1115/1.4011606). Today, that century-old mathematical framework sits at the center of one of civil and geo-environmental engineering's sharpest debates: can compressed carbon dioxide be injected two kilometers underground for decades without waking dormant faults?
En Palabras Sencillas · Explicación Accesible
En palabras sencillas, la roca profunda del subsuelo no es un tanque hueco, sino una esponja dura de arenisca aplastada por kilómetros de estratos encima. Cuando los ingenieros inyectan dióxido de carbono comprimido o agua en sus poros microscópicos, la presión del fluido empuja hacia afuera y reduce la fuerza que mantiene apretadas las fallas geológicas. Mientras la fricción lateral (razón de esfuerzos k_0) supere ese empuje, la falla permanece estable en el modelo; si la presión alcanza una falla frágil ya cercana a su límite, la fricción puede ceder y disparar microsismos.
Two decades after Biot and Willis (1957), James R. Rice and Michael P. Cleary reformulated linear poroelasticity in terms of drained and undrained Poisson ratios, fluid bulk modulus K_f, and Skempton's pore-pressure coefficient B (Reviews of Geophysics, 1976, DOI DOI 10.1029/RG014i002p00227[Scite ↗]). Their formulation clarifies why the phase of the pore fluid itself changes the mechanical coupling: in a sandstone with drained bulk modulus K_d = 12.0 GPa, solid quartz grain modulus K_s = 36.0 GPa, and porosity φ = 0.20, the Biot–Willis coefficient is α = 1 − K_d / K_s = 0.667. When the pores hold saline brine (K_f = 2.2 GPa), Skempton's coefficient is B = 0.394, meaning an undrained increase in mean compressive stress Δσ_mean raises pore pressure by Δp_u = +0.394 Δσ_mean. When compressible supercritical carbon dioxide (K_f = 0.20 GPa) displaces brine in the model, B drops to 0.053. Meanwhile, along an open or damaged fault cutting the reservoir or underlying crystalline rock, conservative Mohr–Coulomb stability screening sets the fault effective-stress coefficient to the Terzaghi limit α_fault = 1.0, distinct from the intact rock-matrix value α = 0.667.
The stakes of poroelastic fault mechanics span both industrial decarbonization and seismic hazard. In 2012, Mark D. Zoback and Steven M. Gorelick argued in PNAS (DOI DOI 10.1073/pnas.1202473109[Scite ↗]) that large-volume CO2 injection into brittle continental interiors carries a high likelihood of triggering small-to-moderate earthquakes that could breach overlying caprock seals. In 2013, William L. Ellsworth documented in Science (DOI DOI 10.1126/science.1225942[Scite ↗]) how deep wastewater disposal in Oklahoma and other midcontinent basins elevated pore pressure along critically stressed crystalline basement faults, shifting regional earthquake rates. In 2015, Víctor Vilarrasa and Jesús Carrera countered in PNAS (DOI DOI 10.1073/pnas.1413284112[Scite ↗]; reply DOI DOI 10.1073/pnas.1511302112[Scite ↗]) that soft sedimentary aquifers have higher stress ratios k_0 and lower stiffness than crystalline basement, while low CO2 viscosity and brine migration restrain pressure buildup near the wellbore. Separating where those two regimes meet—in a quantitative, falsifiable screening model—is the goal of this folio.
§ I.1 · Obstrucción Clásica y Frontera Estructural
Every enduring equation begins as a human question—an act of patient curiosity by investigators who refused to accept an opaque boundary as the final word. Tracing the intellectual arc of Folio E.13 from its earliest formulation in 1941 (Maurice A. Biot publishes the general three-dimensional theory of consolidation coupling elastic skeleton deformation and pore-fluid diffusion (Journal of Applied Physics, DOI DOI 10.1063/1.1712886[Scite ↗]).) to its modern resolution in 2015 (Vilarrasa & Carrera (DOI DOI 10.1073/pnas.1413284112[Scite ↗]; reply DOI DOI 10.1073/pnas.1511302112[Scite ↗]) argue that soft sedimentary storage formations remain less critically stressed and experience lower overpressure than basement rock.) reveals why un-coupled classical approximations repeatedly stalled at a hard analytical barrier. Whenever investigators attempted to treat the governing relation α = 1 − K_d / K_s · Δp_u = +B Δσ_mean · |τ| / (σ_n − α_fault(p_0 + Δp_inj)) < μ_f as a purely local or linearized perturbation, higher-order coupling terms across the kernel triad (Biot 3D Consolidation (1941) · Rice–Cleary Skempton B (1976) · Mohr–Coulomb Fault Slip Margin) amplified truncation error rather than damping it. What appeared for decades to be an intractable computational or experimental pathology was, in reality, a structural phase boundary embedded in the operator domain itself.
Resolving that impasse required shifting from ad-hoc empirical curve fitting to a rigorous, multi-stage operator formulation anchored in Model values (sedimentary k_0 = 0.72, Δp_inj = 4.5 MPa): α = 0.667 · B = 0.394 (brine) / 0.053 (CO2) · τ/σ'_n = 0.404 < 0.60 · Δp_crit = 9.40 MPa. Specifically, the system’s trajectory is governed by control parameter P_1 (Injection Reservoir Overpressure (Δp_inj)) spanning the admissible interval [0.0, 20.0] with step resolution Δ = 0.5 and canonical reference operating point MPa4.5; control parameter P_2 (Horizontal-to-Vertical Stress Ratio (k_0 = σ_h / σ_v)) spanning the admissible interval [0.56, 1.2] with step resolution Δ = 0.02 and canonical reference operating point k_0 = 0.72. Within this state space, any valid proof or physical design must simultaneously satisfy local conservation laws, global boundary conditions, and strict asymptotic scaling—setting the stage for the four-chapter formal derivation in Act II.
"Rock grains carry part of the load inside an intact sandstone matrix (α = 0.667), yet an open fault plane feels nearly the full fluid pressure (α_fault = 1.0)—and that contrast separates a quiet sedimentary basin from a critically stressed basement fault."
§ I.2 · Momentos Históricos Decisivos
Año
Hito
1941
Maurice A. Biot publishes the general three-dimensional theory of consolidation coupling elastic skeleton deformation and pore-fluid diffusion (Journal of Applied Physics, DOI DOI 10.1063/1.1712886[Scite ↗]).
1954
Alec W. Skempton introduces the pore-pressure coefficients A and B relating undrained pore-pressure increments to total stress changes (Géotechnique, DOI DOI 10.1680/geot.1954.4.4.143[Scite ↗]).
1957
Biot and D. G. Willis map the theoretical consolidation moduli onto measurable drained, unjacketed, and fluid compressibility constants, defining α = 1 − K_d / K_s (Journal of Applied Mechanics, DOI DOI 10.1115/1.4011606[Scite ↗]).
1976
James R. Rice and Michael P. Cleary publish exact stress-diffusion solutions and express Skempton B in terms of constituent compressibilities K_d, K_s, and K_f (Reviews of Geophysics, DOI DOI 10.1029/RG014i002p00227[Scite ↗]).
Everyday Analogy: Picture pressing down on two sponges locked inside a vise—one stiff ceramic-foam block filled with water and one filled with carbonated soda gas—while a slanted wooden joint inside the block is held shut only by friction. When you pump extra pressure into the pores, the fluid pushes outward on the slanted joint. If the vise squeezes tightly from the sides (high horizontal stress ratio k_0), the joint resists sliding even under several megapascals of injection pressure; if the side vise is slack (low k_0 in critically stressed basement), a tiny pressure rise lets the joint slip.
How the Two Sliders Work in Plain Words: Our interactive geomechanics laboratory exposes two primary parameters from the screening model. The first slider is Injection Reservoir Overpressure (Δp_inj, from 0.0 to 20.0 MPa), which adds fluid pressure above the ambient 20.0 MPa hydrostatic baseline at roughly 2 km depth. Raising Δp_inj lowers the effective normal stress σ'_n clamping a 60°-dipping cohesionless fault and reduces the tensile hydraulic fracture margin against the minimum principal stress min(σ_v, σ_h). The second slider is the Horizontal-to-Vertical Stress Ratio (k_0 = σ_h / σ_v, from 0.56 to 1.20), which sets how tightly the crust squeezes horizontally relative to the 50.0 MPa vertical overburden. Dragging k_0 down toward 0.60 models a critically stressed basement fault where critical overpressure Δp_crit collapses from 9.40 MPa to 0.57 MPa; dragging k_0 above 1.0 enters a reverse-faulting regime where vertical overburden σ_v becomes the minimum principal stress.
1 · ANALOGÍA COTIDIANA (E.13)
Saturated Sandstone Sponge & Clamped Fault
Grain-skeleton stiffness shares total load while pore pressure reduces fault clamping
Slider 1: Injection Reservoir Overpressure
Slider 2: Horizontal-to-Vertical Stress Ratio
➜
2 · DOS FUERZAS EN COMPETENCIA
▲ Injection Overpressure (Δp_inj)
Raises pore pressure p = p_0 + Δp_inj, lowering effective normal stress σ'_n on faults
▼ Horizontal Stress Ratio (k_0)
Sets lateral clamping σ_h = k_0 σ_v and ambient shear demand τ on dipping faults
➜
3 · UMBRAL CRÍTICO DE FASE
Mohr–Coulomb Slip & Tensile Boundaries
✓ STABLE / NOMINAL REGIME
Model below slip: |τ|/σ'_n < 0.60 and min(σ_v, σ_h) > p_0 + Δp_inj
⚠ CRITICAL BREAKDOWN REGIME
Slip or tensile breach: |τ|/σ'_n ≥ 0.60 or σ'_n ≤ 0 (hydraulic opening)
Plate E.13-D · Visual Intuition Bridge: Before diving into the formal equations, follow how the everyday physical analogy (left) sets two competing mechanisms in tension (center) around a sharp tipping point (right) that you can test directly with the two sliders in Act III.
In Biot's isotropic 3D poroelasticity, the intact sandstone matrix shares hydrostatic stress between mineral grains and pore fluid via α = 1 − K_d / K_s = 1 − 12/36 = 0.667. Under undrained loading (Δp_u = +B Δσ_mean, compression-positive), Rice & Cleary (1976) express Skempton's coefficient as B = (1/K_d − 1/K_s) / [1/K_d − 1/K_s + φ(1/K_f − 1/K_s)], giving B = 0.394 for brine (K_f = 2.2 GPa) and B = 0.053 for supercritical CO2 (K_f = 0.20 GPa) at φ = 0.20. On a cohesionless fault dipping 60° (fault-plane angle β = 30° from vertical σ_v = 50.0 MPa, p_0 = 20.0 MPa, friction μ_f = 0.60), resolving the 2D stress tensor with uncoupled total horizontal stress σ_h = k_0 σ_v gives σ_n = ½(σ_v + σ_h) − ½(σ_v − σ_h)cos(2β) and |τ| = |½(σ_v − σ_h)sin(2β)|. Applying Terzaghi's open-fault effective stress (α_fault = 1.0) yields σ'_n = σ_n − α_fault(p_0 + Δp_inj) and critical overpressure Δp_crit = (σ_n − |τ|/μ_f)/α_fault − p_0. Notice the modeling boundary: the lateral poroelastic stress-path index η_poro = α(1 − 2ν)/(1 − ν) = 0.444 is reported passively, while σ_h = k_0 σ_v is held uncoupled from Δp_inj. Live parameter coupling: Injection Reservoir Overpressure = 4.5 MPa under governing law
.
Separating intact-matrix Biot coupling α from fault-plane Terzaghi effective stress α_fault = 1.0 prevents a subtle physical error. If an analyst mistakenly substitutes matrix α = 0.667 into the fault-plane normal stress σ'_n = σ_n − α(p_0 + Δp_inj), the model artificially cushions the fault by 33% of pore pressure, inflating the predicted critical overpressure at k_0 = 0.72 from 9.40 MPa to 24.09 MPa and masking real slip risk in critically stressed basement (where k_0 = 0.60 actually fails at Δp_crit = 0.57 MPa, not 10.85 MPa). At the same time, omitting poroelastic total-stress buildup η_poro Δp_inj in σ_h makes this closed-form screening tool conservative on normal-faulting clamping during injection, while reminding practitioners that real reservoir design requires coupled 3D multiphase flow and geomechanics simulation. In reverse-faulting regimes (k_0 > 1.0), horizontal stress exceeds vertical overburden, so min(σ_v, σ_h) switches to σ_v = 50.0 MPa for hydraulic fracture screening and |τ| remains non-negative via the absolute value of ½(σ_v − σ_h)sin(2β).
§ II.1 · Enunciado Formal, Variedad de Espacio de Estados y Operador Gobernante
To elevate Folio E.13 (Biot 3D Poroelasticity, Skempton Undrained Coupling & Mohr–Coulomb Fault Slip Margin in Geologic CO2 Storage) from a qualitative summary to an executable mathematical and physical treatise, we first define the exact state-space manifold on which the operator α = 1 − K_d / K_s · Δp_u = +B Δσ_mean · |τ| / (σ_n − α_fault(p_0 + Δp_inj)) < μ_f acts. Let the system state be parameterized by control parameter P_1 (Injection Reservoir Overpressure (Δp_inj)) spanning the admissible interval [0.0, 20.0] with step resolution Δ = 0.5 and canonical reference operating point MPa4.5; control parameter P_2 (Horizontal-to-Vertical Stress Ratio (k_0 = σ_h / σ_v)) spanning the admissible interval [0.56, 1.2] with step resolution Δ = 0.02 and canonical reference operating point k_0 = 0.72. Over this bounded domain, the coupled kernels (Biot 3D Consolidation (1941) · Rice–Cleary Skempton B (1976) · Mohr–Coulomb Fault Slip Margin) map every admissible input configuration to a unique, deterministic equilibrium or deductive fixed point recomputed by skills/engineering/e13/verify_e13_biot_poroelasticity.py.
Crucially, well-posedness across the Model values (sedimentary k_0 = 0.72, Δp_inj = 4.5 MPa): α = 0.667 · B = 0.394 (brine) / 0.053 (CO2) · τ/σ'_n = 0.404 < 0.60 · Δp_crit = 9.40 MPa regime requires that the governing operator preserve dimensional homogeneity, non-negativity of physical energy/entropy functionals, and strict monotony along the primary reaction or proof coordinate. Whenever a simplified model omits one of the coupled terms in α = 1 − K_d / K_s · Δp_u = +B Δσ_mean · |τ| / (σ_n − α_fault(p_0 + Δp_inj)) < μ_f, the resulting approximation violates boundary compatibility and diverges from the primary peer-reviewed evidence (Scite Smart Citation Index entry for Biot 1941, "General Theory of Three-Dimensional Consolidation" (Journal of Applied Physics, DOI 10.1063/1.1712886), fetched 2026-11-20: 4,896 citing records (29 supporting, 4,865 mentioning, 2 contrasting) and no retraction notice. These counts describe that foundational paper, not this folio.).
§ II.2 · Descomposición Demostrativa y Mecanismo en Cuatro Etapas (Etapas 1–4)
Rather than treating α = 1 − K_d / K_s · Δp_u = +B Δσ_mean · |τ| / (σ_n − α_fault(p_0 + Δp_inj)) < μ_f as an opaque black-box formula, we decompose the proof and physical mechanism of Folio E.13 into four clear, verifiable stages. True scientific tools do not ask for blind trust; they invite inspection. Each stage represents a rigorous transformation of the state vector—corresponding one-to-one with the 4-stage interactive stepper in Act III and the standalone verifier in skills/engineering/e13/verify_e13_biot_poroelasticity.py:
Derivación y Transición de Estado · Etapa 1
Formal Stage Mechanism: Stage 1 (Biot–Willis 3D Effective Stress, Continuing E.05): Whereas Terzaghi's 1D soil limit treats solid grains as incompressible (α → 1), stiff porous sandstone with drained bulk modulus K_d = 12.0 GPa and solid mineral grain modulus K_s = 36.0 GPa carries part of the hydrostatic stress in its grain skeleton, yielding α = 1 − K_d / K_s = 0.667 (Biot 1941, DOI DOI 10.1063/1.1712886[Scite ↗]; Biot & Willis 1957, DOI DOI 10.1115/1.4011606[Scite ↗]).
Operator Coupling & Invariant Closure: At Stage 1 of the Folio E.13 derivation chain, the intermediate state maps directly onto the governing law α = 1 − K_d / K_s · Δp_u = +B Δσ_mean · |τ| / (σ_n − α_fault(p_0 + Δp_inj)) < μ_f under benchmark regime Model values (sedimentary k_0 = 0.72, Δp_inj = 4.5 MPa): α = 0.667 · B = 0.394 (brine) / 0.053 (CO2) · τ/σ'_n = 0.404 < 0.60 · Δp_crit = 9.40 MPa. To ensure that deductive or physical flux is conserved without unverified hand-waving as the system advances from Stage 1 toward terminal convergence, the transition operator enforces the companion verification constraint: Compute intact-matrix Biot-Willis coefficient alpha = 1 - K_d / K_s (requiring 0 < K_d < K_s) and Skempton undrained coefficient B = (1/K_d - 1/K_s) / [1/K_d - 1/K_s + phi*(1/K_f - 1/K_s)] under compression-positive sign convention delta_p_u = +B * delta_sigma_mean. Every numerical trajectory and geometric projection in Plate E.13-A and Plate E.13-B below evaluates this exact stage transfer function in real time.
Derivación y Transición de Estado · Etapa 2
Formal Stage Mechanism: Stage 2 (Skempton Undrained Pore-Pressure Response B): Under compression-positive geomechanics (Δp_u = +B Δσ_mean), Skempton (1954, DOI DOI 10.1680/geot.1954.4.4.143[Scite ↗]) and Rice & Cleary (1976, DOI DOI 10.1029/RG014i002p00227[Scite ↗]) write B = (1/K_d − 1/K_s) / [1/K_d − 1/K_s + φ(1/K_f − 1/K_s)]. For φ = 0.20 and brine bulk modulus K_f = 2.2 GPa, B = 0.394; replacing brine with compressible supercritical CO2 (K_f = 0.20 GPa) lowers B to 0.053 in the folio model.
Operator Coupling & Invariant Closure: At Stage 2 of the Folio E.13 derivation chain, the intermediate state maps directly onto the governing law α = 1 − K_d / K_s · Δp_u = +B Δσ_mean · |τ| / (σ_n − α_fault(p_0 + Δp_inj)) < μ_f under benchmark regime Model values (sedimentary k_0 = 0.72, Δp_inj = 4.5 MPa): α = 0.667 · B = 0.394 (brine) / 0.053 (CO2) · τ/σ'_n = 0.404 < 0.60 · Δp_crit = 9.40 MPa. To ensure that deductive or physical flux is conserved without unverified hand-waving as the system advances from Stage 2 toward terminal convergence, the transition operator enforces the companion verification constraint: Keep fault-plane Terzaghi effective stress alpha_fault = 1.0 distinct from matrix alpha, and apply alpha_fault consistently in both sigma_n_eff = sigma_n - alpha_fault*(p_0 + delta_p_inj) and critical_delta_p = (sigma_n - |tau|/mu_f)/alpha_fault - p_0; state explicitly when total stress sigma_h is held uncoupled from eta_poro * delta_p_inj. Every numerical trajectory and geometric projection in Plate E.13-A and Plate E.13-B below evaluates this exact stage transfer function in real time.
Derivación y Transición de Estado · Etapa 3
Formal Stage Mechanism: Stage 3 (Mohr–Coulomb Fault Slip Margin & Stress-Regime Contrast): On a cohesionless fault dipping 60° (fault-plane angle β = 30° from vertical σ_v, normal 30° from σ_h; σ_v = 50.0 MPa, hydrostatic p_0 = 20.0 MPa, μ_f = 0.60, α_fault = 1.0, and uncoupled total stress σ_h = k_0 σ_v), a sedimentary stress ratio k_0 = 0.72 gives σ_n = 39.50 MPa, τ = 6.062 MPa, and Δp_crit = 9.40 MPa; at Δp_inj = 4.5 MPa, slip tendency τ/σ'_n = 0.404 stays below 0.60. In a critically stressed crystalline basement (k_0 = 0.60), Δp_crit drops to 0.57 MPa and Δp_inj = 4.5 MPa raises τ/σ'_n to 0.825 (> 0.60).
Operator Coupling & Invariant Closure: At Stage 3 of the Folio E.13 derivation chain, the intermediate state maps directly onto the governing law α = 1 − K_d / K_s · Δp_u = +B Δσ_mean · |τ| / (σ_n − α_fault(p_0 + Δp_inj)) < μ_f under benchmark regime Model values (sedimentary k_0 = 0.72, Δp_inj = 4.5 MPa): α = 0.667 · B = 0.394 (brine) / 0.053 (CO2) · τ/σ'_n = 0.404 < 0.60 · Δp_crit = 9.40 MPa. To ensure that deductive or physical flux is conserved without unverified hand-waving as the system advances from Stage 3 toward terminal convergence, the transition operator enforces the companion verification constraint: Check both shear slip tendency |tau| / sigma_n_eff < mu_f and tensile hydraulic margin min(sigma_v, sigma_h) - (p_0 + delta_p_inj) > 0; treat sigma_n_eff <= 0 explicitly as tensile failure with undefined shear slip tendency. Every numerical trajectory and geometric projection in Plate E.13-A and Plate E.13-B below evaluates this exact stage transfer function in real time.
Derivación y Transición de Estado · Etapa 4
Formal Stage Mechanism: Stage 4 (Open Hypothesis, Tier T1–T2, and Falsification Condition): Hypothesis (Tier T1–T2): in stiff porous sedimentary storage reservoirs where stress ratio k_0 keeps Δp_inj < Δp_crit and compressible supercritical CO2 lowers undrained B while keeping overpressure moderate (Vilarrasa & Carrera 2015, DOI DOI 10.1073/pnas.1413284112[Scite ↗]), fault slip tendency remains below μ_f; this hypothesis is falsified in any site where pore pressure reaches critically stressed basement faults (Zoback & Gorelick 2012, DOI DOI 10.1073/pnas.1202473109[Scite ↗]; Ellsworth 2013, DOI DOI 10.1126/science.1225942[Scite ↗]), drives σ'_n ≤ 0, or where coupled poroelastic stress transfer pushes |τ|/σ'_n ≥ μ_f.
Operator Coupling & Invariant Closure: At Stage 4 of the Folio E.13 derivation chain, the intermediate state maps directly onto the governing law α = 1 − K_d / K_s · Δp_u = +B Δσ_mean · |τ| / (σ_n − α_fault(p_0 + Δp_inj)) < μ_f under benchmark regime Model values (sedimentary k_0 = 0.72, Δp_inj = 4.5 MPa): α = 0.667 · B = 0.394 (brine) / 0.053 (CO2) · τ/σ'_n = 0.404 < 0.60 · Δp_crit = 9.40 MPa. To ensure that deductive or physical flux is conserved without unverified hand-waving as the system advances from Stage 4 toward terminal convergence, the transition operator enforces the companion verification constraint: Frame injection stability as a site-dependent Tier T1-T2 hypothesis bounded by stress ratio k_0 and basement fault proximity; never extrapolate closed-form screening outputs into site-specific permit claims. Every numerical trajectory and geometric projection in Plate E.13-A and Plate E.13-B below evaluates this exact stage transfer function in real time.
§ II.3 · Invariantes de Verificación Determinista, Escalamiento Dimensional y Cotas de Estabilidad
Every quantitative claim in Folio E.13 is tied to three falsification rules listed in biot-poroelasticity-fault-slip-SKILL.md and executed by skills/engineering/e13/verify_e13_biot_poroelasticity.py:
Invariant E.13-R2: Keep fault-plane Terzaghi effective stress alpha_fault = 1.0 distinct from matrix alpha, and apply alpha_fault consistently in both sigma_n_eff = sigma_n - alpha_fault*(p_0 + delta_p_inj) and critical_delta_p = (sigma_n - |tau|/mu_f)/alpha_fault - p_0; state explicitly when total stress sigma_h is held uncoupled from eta_poro * delta_p_inj.
Recomputed offline by skills/engineering/e13/verify_e13_biot_poroelasticity.py; primary anchor DOI 10.1063/1.1712886.
Invariant E.13-R3: Check both shear slip tendency |tau| / sigma_n_eff < mu_f and tensile hydraulic margin min(sigma_v, sigma_h) - (p_0 + delta_p_inj) > 0; treat sigma_n_eff <= 0 explicitly as tensile failure with undefined shear slip tendency.
Recomputed offline by skills/engineering/e13/verify_e13_biot_poroelasticity.py; primary anchor DOI 10.1063/1.1712886.
Invariant E.13-R4: Frame injection stability as a site-dependent Tier T1-T2 hypothesis bounded by stress ratio k_0 and basement fault proximity; never extrapolate closed-form screening outputs into site-specific permit claims.
Recomputed offline by skills/engineering/e13/verify_e13_biot_poroelasticity.py; primary anchor DOI 10.1063/1.1712886.
Together, Invariants E.13-R1 through E.13-R4 close the epistemic loop between symbolic derivation and numerical execution. If a code edit violates these bounds, the verifier fails.
§ II.4 · Análisis Contrafactual de Supresión de Axiomas y Anatomía de Frontera Singular
Primary Counterfactual Knockout (SIDENOTE E.13-A · OPEN SCIENTIFIC DEBATE · SEDIMENTARY RESERVOIRS VS. BASEMENT FAULTS): Zoback & Gorelick (2012, DOI DOI 10.1073/pnas.1202473109[Scite ↗]) warned that large-scale geologic carbon dioxide injection into brittle continental-interior rocks carries a substantial probability of triggering small-to-moderate earthquakes that could threaten caprock seal integrity. Vilarrasa & Carrera (2015, DOI DOI 10.1073/pnas.1413284112[Scite ↗]; reply DOI DOI 10.1073/pnas.1511302112[Scite ↗]) countered that soft sedimentary basins are less critically stressed than crystalline basement, while brine displacement and dissolution limit overpressure. Ellsworth (2013, DOI DOI 10.1126/science.1225942[Scite ↗]) documented how deep wastewater injection near basement faults drove midcontinent seismicity, showing why basal fault proximity governs operational risk.
Secondary Coupling & Regime Boundary (SIDENOTE E.13-B · MATRIX α, FAULT α_fault & UNCOUPLED TOTAL-STRESS CAVEAT): Intact porous sandstone shares load across mineral grain contacts (α = 1 − K_d/K_s = 0.667), giving a lateral poroelastic stress-path index η_poro = α(1 − 2ν)/(1 − ν) = 0.444 at ν = 0.25. Along a damaged or open fault surface, conservative Mohr–Coulomb screening uses α_fault = 1.0 consistently in both σ'_n = σ_n − α_fault(p_0 + Δp_inj) and Δp_crit. In this reduced closed-form model, η_poro is reported passively while total horizontal stress remains uncoupled at σ_h = k_0 σ_v rather than adding η_poro Δp_inj.
Mathematical & Physical Necessity of the Full Operator: Testing a theorem or physical law by knocking out its core hypothesis is one of the sharpest ways a human mind builds intuition. This counterfactual analysis shows why every coupling term in α = 1 − K_d / K_s · Δp_u = +B Δσ_mean · |τ| / (σ_n − α_fault(p_0 + Δp_inj)) < μ_f is indispensable: When the primary control parameter is dragged to its degenerate boundary in the Act III observatory below, the stabilizing restorative term vanishes, reproducing the classical collapse predicted by theory and illustrating that our solver is an interactive computational model rather than a static animation.
Acto III — Laboratorio Interactivo y Verificación Numérica
§ III.1 · Tres Experimentos Guiados para Probar
Experiment 1 (Sedimentary Storage Margin vs. Overpressure Δp_inj): Keep k_0 = 0.72 and sweep Δp_inj from 4.5 MPa upward past 9.40 MPa. Watch fault slip tendency |τ|/σ'_n climb from 0.404 past the μ_f = 0.60 threshold at Δp_crit = 9.40 MPa, then cross into hydraulic tensile opening (σ'_n ≤ 0) above 19.50 MPa or σ_h − p = 0 at Δp_inj = 16.0 MPa.
Experiment 2 (Critically Stressed Basement k_0 = 0.60): Return Δp_inj to 4.5 MPa and drag k_0 down from 0.72 to 0.60. Observe how Δp_crit collapses from 9.40 MPa to 0.57 MPa and slip tendency jumps to 0.825 (above 0.60), reproducing the Zoback & Gorelick / Ellsworth sensitivity to critically stressed basement faults.
Experiment 3 (Reverse-Faulting Regime k_0 > 1.0 & Overlays): Drag k_0 above 1.00 toward 1.20 to inspect the thrust-faulting regime where σ_3 = min(σ_v, σ_h) switches to σ_v = 50.0 MPa, and toggle the 4-Lens Observatory tabs (3D Surface, Phase Portraits, Kirchhoff Ribbon, Polar Radar) to inspect parameter margins.
Plate E.13-A & E.13-B · Biot 3D Consolidation (1941) · Rice–Cleary Skempton B (1976) · Mohr–Coulomb Fault Slip Margin
Running python skills/engineering/e13/verify_e13_biot_poroelasticity.py from the repository root recomputes these values, and its planted-defect mode must fail.
Act IV — Imagining Humanity's Future: Falsifiable Subsurface Screening & Open Geomechanics
Geologic carbon storage and geothermal reservoirs sit beneath the soil and cities where people live and draw groundwater. Making subsurface pressure-management math transparent—separating what intact rock grains carry (α = 0.667), how pore-fluid compressibility modulates undrained response (B = 0.394 for brine vs. 0.053 for supercritical CO2), and when a fault reaches friction μ_f—allows civil engineers, regulators, and AI verification scripts to inspect assumptions line by line before a borehole is drilled. This folio states an open, site-dependent Tier T1–T2 hypothesis rather than a blanket promise of safety.
In the Zoback & Gorelick (2012) versus Vilarrasa & Carrera (2015) exchange, both sides rely on the same Biot and Mohr–Coulomb physics; they disagree on which geological parameters dominate at continental scale. Under the Tier T1–T2 hypothesis stated here, stiff porous sedimentary reservoirs with moderate horizontal stress ratios (k_0 = 0.72) and modest injection overpressure (Δp_inj < Δp_crit = 9.40 MPa) remain below Mohr–Coulomb slip, aided by supercritical CO2's low Skempton coupling (B = 0.053). That hypothesis is explicitly falsified in any site where pore-pressure plumes migrate downward into critically stressed basement faults (k_0 ≤ 0.60, where Δp_crit ≤ 0.57 MPa or negative pre-injection), where total pore pressure breaches min(σ_v, σ_h) in tensile fracture, or where coupled poroelastic shear transfer drives |τ|/σ'_n ≥ μ_f. Pairing open Python verifiers with explicit negative controls ensures that screening models never hide these failure boundaries.
Descubrimiento de frontera
Biot 3D Poroelasticity, Skempton Fluid Contrast & the Sedimentary-vs-Basement Fault Debate
Whether large-scale CO2 storage reactivates faults hinges on stress regime and fluid compressibility: Zoback & Gorelick (2012, DOI DOI 10.1073/pnas.1202473109[Scite ↗]) and Ellsworth (2013, DOI DOI 10.1126/science.1225942[Scite ↗]) highlight critically stressed basement faults (Δp_crit = 0.57 MPa at k_0 = 0.60 in this model), whereas Vilarrasa & Carrera (2015, DOI DOI 10.1073/pnas.1413284112[Scite ↗]) emphasize softer sedimentary basins (Δp_crit = 9.40 MPa at k_0 = 0.72) and low-viscosity CO2 behavior (B = 0.053 vs. 0.394 brine).
§ IV.3 · Transferencia Interdisciplinaria de Sistemas y Continuo
Structural & Mathematical Isomorphism (Continues E.01/E.05): One of the defining principles of Informatico.ai is that deep governing operators transcend disciplinary silos. The exact mathematical structure of Folio E.13 (α = 1 − K_d / K_s · Δp_u = +B Δσ_mean · |τ| / (σ_n − α_fault(p_0 + Δp_inj)) < μ_f) reappears across coupled multiscale systems: Continues E.01/E.05
Living Edition & Multi-Family Council Provenance (REV 1.0): REV 1.0 (Published 2026-11-20): Volume VII Civil & Geomechanical Engineering monograph continuing Folios E.01 & E.05 via Biot 3D poroelasticity (1941), Skempton & Rice–Cleary undrained pore-pressure coupling (1954, 1976), and Mohr–Coulomb fault slip stability across the Zoback–Gorelick (2012) vs. Vilarrasa–Carrera (2015) geologic CO2 storage debate. Verification note: all eight DOIs in this folio were checked against Crossref and the Scite index on 2026-11-20 with zero retraction notices; all numerical outputs are recomputed offline by skills/engineering/e13/verify_e13_biot_poroelasticity.py and represent illustrative closed-form model outputs under uncoupled total horizontal stress rather than field measurements. By pairing multi-chapter mathematical and physical derivations with interactive WebGL2/SVG observatories and downloadable SKILL.md companions, Folio E.13 equips engineers, mathematicians, physicists, and AI agents with a permanent, falsifiable building block for frontier discovery.
Acto V — Fuentes
Biot, M. A. (1941). General Theory of Three-Dimensional Consolidation. Journal of Applied Physics, 12(2), 155–164. DOI: DOI 10.1063/1.1712886[Scite ↗].
Biot, M. A., & Willis, D. G. (1957). The Elastic Coefficients of the Theory of Consolidation. Journal of Applied Mechanics, 24(4), 594–601. DOI: DOI 10.1115/1.4011606[Scite ↗].
Rice, J. R., & Cleary, M. P. (1976). Some basic stress diffusion solutions for fluid-saturated elastic porous media with compressible constituents. Reviews of Geophysics, 14(2), 227–241. DOI: DOI 10.1029/RG014i002p00227[Scite ↗].
Zoback, M. D., & Gorelick, S. M. (2012). Earthquake triggering and large-scale geologic storage of carbon dioxide. Proceedings of the National Academy of Sciences, 109(26), 10164–10168. DOI: DOI 10.1073/pnas.1202473109[Scite ↗].
Vilarrasa, V., & Carrera, J. (2015). Geologic carbon storage is unlikely to trigger large earthquakes and reactivate faults through which CO2 could leak. Proceedings of the National Academy of Sciences, 112(19), 5938–5943. DOI: DOI 10.1073/pnas.1413284112[Scite ↗].
Vilarrasa, V., & Carrera, J. (2015). Reply to Zoback and Gorelick: Geologic carbon storage remains a safe strategy to significantly reduce CO2 emissions. Proceedings of the National Academy of Sciences, 112(30), E3980. DOI: DOI 10.1073/pnas.1511302112[Scite ↗].
Nicholson, J. M., et al. (2021). scite: A smart citation index that displays the context of citations and classifies their intent using deep learning (https://scite.ai). Quantitative Science Studies, 2(3), 882–898. DOI: DOI 10.1162/qss_a_00146[Scite ↗].
ACTO VI · CRUCIGRAMA CIENTÍFICO INTERACTIVO · PASAPORTE DE COLECCIONISTA EN LOCALSTORAGE
Folio E.13 · Crucigrama de Poroelasticidad de Biot y Fallas
Inspirado en los crucigramas de los grandes diarios: pon a prueba tu dominio de las leyes e hitos de E.13. Esta edición en español cuenta con su propia cuadrícula 10×10 y vocabulario científico original independiente del inglés.
ES-MX · EDICIÓN INDEPENDIENTE EN ESPAÑOL (10×10)
0 / 51 Folios Sellados (EN: 0 · ES-MX: 0)
1 ACROSSSelecciona cualquier celda o pista abajo para comenzar a resolver.
Horizontales
Verticales
Selecciona una celda o pista y escribe A–Z. Espacio alterna Horizontal/Vertical; el avance se guarda en localStorage.
Para quien construye: método, herramientas e historial
Scite Smart Citation Index entry for Biot 1941, "General Theory of Three-Dimensional Consolidation" (Journal of Applied Physics, DOI 10.1063/1.1712886), fetched 2026-11-20: 4,896 citing records (29 supporting, 4,865 mentioning, 2 contrasting) and no retraction notice. These counts describe that foundational paper, not this folio.
Give any AI agent or engineering pipeline the governing equations of Folio E.13: a portable SKILL.md, a zero-dependency Python verifier (verify_e13_biot_poroelasticity.py), or the live telemetry as JSON.
Show the SKILL.md source
---
name: biot-poroelasticity-fault-slip
description: AI-agnostic civil geomechanics skill for Biot 3D poroelasticity (alpha = 1 - K_d/K_s), Rice-Cleary Skempton B coupling, and cohesionless Mohr-Coulomb fault slip margin under subsurface fluid injection.
license: MIT
compatibility: Claude Code, GitHub Copilot, Cursor, Google Antigravity, OpenAI Codex, Ollama (Qwen 3.8 / Gemma 4)
---
# Biot 3D Poroelasticity, Skempton Undrained Coupling & Mohr–Coulomb Fault Slip Margin in Geologic CO2 Storage (Folio E.13)
A plain-text companion to the essay at https://informatico.ai/engineering/e13/ (`E.13 · Biot Poroelasticity & Fault Slip Margin · REV 1.0`, `REV 1.0`, redated `2026-11-20`).
## The governing relation
`α = 1 − K_d / K_s · Δp_u = +B Δσ_mean · |τ| / (σ_n − α_fault(p_0 + Δp_inj)) < μ_f`
## Rules the essay derives
1. Compute intact-matrix Biot-Willis coefficient alpha = 1 - K_d / K_s (requiring 0 < K_d < K_s) and Skempton undrained coefficient B = (1/K_d - 1/K_s) / [1/K_d - 1/K_s + phi*(1/K_f - 1/K_s)] under compression-positive sign convention delta_p_u = +B * delta_sigma_mean.
2. Keep fault-plane Terzaghi effective stress alpha_fault = 1.0 distinct from matrix alpha, and apply alpha_fault consistently in both sigma_n_eff = sigma_n - alpha_fault*(p_0 + delta_p_inj) and critical_delta_p = (sigma_n - |tau|/mu_f)/alpha_fault - p_0; state explicitly when total stress sigma_h is held uncoupled from eta_poro * delta_p_inj.
3. Check both shear slip tendency |tau| / sigma_n_eff < mu_f and tensile hydraulic margin min(sigma_v, sigma_h) - (p_0 + delta_p_inj) > 0; treat sigma_n_eff <= 0 explicitly as tensile failure with undefined shear slip tendency.
4. Frame injection stability as a site-dependent Tier T1-T2 hypothesis bounded by stress ratio k_0 and basement fault proximity; never extrapolate closed-form screening outputs into site-specific permit claims.
## How it works, in four stages
- Stage 1 (Biot–Willis 3D Effective Stress, Continuing E.05): Whereas Terzaghi's 1D soil limit treats solid grains as incompressible (α → 1), stiff porous sandstone with drained bulk modulus K_d = 12.0 GPa and solid mineral grain modulus K_s = 36.0 GPa carries part of the hydrostatic stress in its grain skeleton, yielding α = 1 − K_d / K_s = 0.667 (Biot 1941, DOI 10.1063/1.1712886; Biot & Willis 1957, DOI 10.1115/1.4011606).
- Stage 2 (Skempton Undrained Pore-Pressure Response B): Under compression-positive geomechanics (Δp_u = +B Δσ_mean), Skempton (1954, DOI 10.1680/geot.1954.4.4.143) and Rice & Cleary (1976, DOI 10.1029/RG014i002p00227) write B = (1/K_d − 1/K_s) / [1/K_d − 1/K_s + φ(1/K_f − 1/K_s)]. For φ = 0.20 and brine bulk modulus K_f = 2.2 GPa, B = 0.394; replacing brine with compressible supercritical CO2 (K_f = 0.20 GPa) lowers B to 0.053 in the folio model.
- Stage 3 (Mohr–Coulomb Fault Slip Margin & Stress-Regime Contrast): On a cohesionless fault dipping 60° (fault-plane angle β = 30° from vertical σ_v, normal 30° from σ_h; σ_v = 50.0 MPa, hydrostatic p_0 = 20.0 MPa, μ_f = 0.60, α_fault = 1.0, and uncoupled total stress σ_h = k_0 σ_v), a sedimentary stress ratio k_0 = 0.72 gives σ_n = 39.50 MPa, τ = 6.062 MPa, and Δp_crit = 9.40 MPa; at Δp_inj = 4.5 MPa, slip tendency τ/σ'_n = 0.404 stays below 0.60. In a critically stressed crystalline basement (k_0 = 0.60), Δp_crit drops to 0.57 MPa and Δp_inj = 4.5 MPa raises τ/σ'_n to 0.825 (> 0.60).
- Stage 4 (Open Hypothesis, Tier T1–T2, and Falsification Condition): Hypothesis (Tier T1–T2): in stiff porous sedimentary storage reservoirs where stress ratio k_0 keeps Δp_inj < Δp_crit and compressible supercritical CO2 lowers undrained B while keeping overpressure moderate (Vilarrasa & Carrera 2015, DOI 10.1073/pnas.1413284112), fault slip tendency remains below μ_f; this hypothesis is falsified in any site where pore pressure reaches critically stressed basement faults (Zoback & Gorelick 2012, DOI 10.1073/pnas.1202473109; Ellsworth 2013, DOI 10.1126/science.1225942), drives σ'_n ≤ 0, or where coupled poroelastic stress transfer pushes |τ|/σ'_n ≥ μ_f.
## Reference values stated in the essay
- **Biot α & Skempton B (Brine / CO2)**: `α = 0.667 · B = 0.394 / 0.053 (model)`
- **Fault Slip Tendency (|τ| / σ'_n)**: `0.404 < 0.60 (Δp_crit = 9.40 MPa, model)`
- **Shear & Hydraulic Margins**: `Slip +4.90 MPa · Tensile +11.50 MPa (model)`
- **Mohr–Coulomb Fault Status**: `BELOW SLIP THRESHOLD (model, uncoupled σ_h)`
## Check it yourself
This skill ships a verifier that recomputes its values. Its planted-defect mode must fail:
```
python skills/engineering/e13/verify_e13_biot_poroelasticity.py
python skills/engineering/e13/verify_e13_biot_poroelasticity.py --planted-defect
```
## Primary source
- https://doi.org/10.1063/1.1712886 (Scite report: https://scite.ai/reports/10.1063/1.1712886)
- What the essay compares against: Model values (sedimentary k_0 = 0.72, Δp_inj = 4.5 MPa): α = 0.667 · B = 0.394 (brine) / 0.053 (CO2) · τ/σ'_n = 0.404 < 0.60 · Δp_crit = 9.40 MPa
## Recent research context
- **Biot 3D Poroelasticity, Skempton Fluid Contrast & the Sedimentary-vs-Basement Fault Debate**: Whether large-scale CO2 storage reactivates faults hinges on stress regime and fluid compressibility: Zoback & Gorelick (2012, DOI 10.1073/pnas.1202473109) and Ellsworth (2013, DOI 10.1126/science.1225942) highlight critically stressed basement faults (Δp_crit = 0.57 MPa at k_0 = 0.60 in this model), whereas Vilarrasa & Carrera (2015, DOI 10.1073/pnas.1413284112) emphasize softer sedimentary basins (Δp_crit = 9.40 MPa at k_0 = 0.72) and low-viscosity CO2 behavior (B = 0.053 vs. 0.394 brine).
#!/usr/bin/env python3
"""Deterministic verifier for Folio E.13: Biot 3D Poroelasticity, Skempton B & Mohr-Coulomb Fault Slip Margin.
Sign convention (compression-positive geomechanics):
- Biot-Willis intact-matrix effective stress coefficient: alpha = 1 - K_d / K_s
- Rice-Cleary (1976) Skempton undrained coefficient:
B = (1/K_d - 1/K_s) / [1/K_d - 1/K_s + phi * (1/K_f - 1/K_s)]
with undrained pore-pressure increment delta_p_u = +B * delta_sigma_mean.
- Lateral poroelastic stress-path factor (passive readout; total sigma_h = k_0 * sigma_v is uncoupled):
eta_poro = alpha * (1 - 2*nu) / (1 - nu)
- Cohesionless Mohr-Coulomb fault plane (dipping 90 - beta from horizontal; fault-plane angle beta from sigma_v, i.e. normal beta from sigma_h):
sigma_n = 0.5*(sigma_v + sigma_h) - 0.5*(sigma_v - sigma_h)*cos(2*beta)
|tau| = |0.5*(sigma_v - sigma_h)*sin(2*beta)|
sigma'_n = sigma_n - alpha_fault * (p_0 + delta_p_inj)
slip_tendency = |tau| / sigma'_n (when sigma'_n > 0)
tensile_margin = min(sigma_v, sigma_h) - (p_0 + delta_p_inj)
critical_delta_p = ((sigma_n - |tau| / mu_f) / alpha_fault) - p_0
Planted-defect mode (`--planted-defect`):
Substitutes the intact sandstone Biot coefficient `biot_alpha` (0.667) instead of `alpha_fault` (1.0)
inside the fault-plane effective normal stress and critical overpressure calculations, illustrating
how confusing matrix alpha with open-fault Terzaghi alpha_fault overestimates fault stability.
"""
from __future__ import annotations
import argparse
import json
import math
import sys
from typing import Any
def evaluate_biot_poroelastic_fault_slip(
drained_bulk_kd_gpa: float = 12.0,
solid_grain_ks_gpa: float = 36.0,
porosity_phi: float = 0.20,
fluid_bulk_kf_gpa: float = 2.2,
drained_poisson_nu: float = 0.25,
sigma_v_mpa: float = 50.0,
stress_ratio_k0: float = 0.72,
hydrostatic_p0_mpa: float = 20.0,
delta_p_inj_mpa: float = 4.5,
fault_angle_beta_deg: float = 30.0,
friction_mu_f: float = 0.60,
alpha_fault: float = 1.0,
planted_defect: bool = False,
) -> dict[str, Any]:
"""Compute Biot 3D poroelastic constants, Skempton B, and Mohr-Coulomb fault slip margins."""
numeric_inputs = (
drained_bulk_kd_gpa,
solid_grain_ks_gpa,
fluid_bulk_kf_gpa,
porosity_phi,
drained_poisson_nu,
sigma_v_mpa,
stress_ratio_k0,
hydrostatic_p0_mpa,
delta_p_inj_mpa,
fault_angle_beta_deg,
friction_mu_f,
alpha_fault,
)
if not all(math.isfinite(v) for v in numeric_inputs):
raise ValueError("All poroelastic and stress parameters must be finite numbers")
if drained_bulk_kd_gpa <= 0.0 or solid_grain_ks_gpa <= 0.0 or drained_bulk_kd_gpa >= solid_grain_ks_gpa:
raise ValueError("Require 0 < K_d < K_s (GPa) for physical Biot-Willis alpha in (0, 1)")
if fluid_bulk_kf_gpa <= 0.0 or fluid_bulk_kf_gpa > solid_grain_ks_gpa:
raise ValueError("Require 0 < K_f <= K_s (GPa) for physical Skempton B in (0, 1]")
if not (0.0 < porosity_phi < 1.0):
raise ValueError("Porosity phi must lie in (0, 1)")
if not (-1.0 < drained_poisson_nu < 0.5):
raise ValueError("Drained Poisson ratio nu must lie in (-1.0, 0.5)")
if sigma_v_mpa <= 0.0 or stress_ratio_k0 <= 0.0 or hydrostatic_p0_mpa < 0.0 or delta_p_inj_mpa < 0.0:
raise ValueError("Overburden, stress ratio, and pore pressures must be valid")
if friction_mu_f <= 0.0 or alpha_fault <= 0.0 or alpha_fault > 1.0:
raise ValueError("Friction mu_f must be positive and alpha_fault in (0, 1]")
biot_alpha = 1.0 - (drained_bulk_kd_gpa / solid_grain_ks_gpa)
c_drain = (1.0 / drained_bulk_kd_gpa) - (1.0 / solid_grain_ks_gpa)
c_fluid = porosity_phi * ((1.0 / fluid_bulk_kf_gpa) - (1.0 / solid_grain_ks_gpa))
skempton_b = c_drain / (c_drain + c_fluid)
eta_poro = biot_alpha * (1.0 - 2.0 * drained_poisson_nu) / (1.0 - drained_poisson_nu)
sigma_h_mpa = stress_ratio_k0 * sigma_v_mpa
sigma_3_mpa = min(sigma_v_mpa, sigma_h_mpa)
beta_rad = math.radians(fault_angle_beta_deg)
sigma_mean_2d = 0.5 * (sigma_v_mpa + sigma_h_mpa)
sigma_diff_half = 0.5 * (sigma_v_mpa - sigma_h_mpa)
sigma_n_mpa = sigma_mean_2d - sigma_diff_half * math.cos(2.0 * beta_rad)
shear_tau_mpa = abs(sigma_diff_half * math.sin(2.0 * beta_rad))
effective_fault_alpha = biot_alpha if planted_defect else alpha_fault
total_p_mpa = hydrostatic_p0_mpa + delta_p_inj_mpa
sigma_n_eff_mpa = sigma_n_mpa - effective_fault_alpha * total_p_mpa
tensile_margin_mpa = sigma_3_mpa - total_p_mpa
tensile_safe = sigma_n_eff_mpa > 0.0 and tensile_margin_mpa > 0.0
critical_delta_p_mpa = ((sigma_n_mpa - (shear_tau_mpa / friction_mu_f)) / effective_fault_alpha) - hydrostatic_p0_mpa
slip_margin_mpa = critical_delta_p_mpa - delta_p_inj_mpa
if sigma_n_eff_mpa <= 0.0:
slip_tendency: float | None = None
slip_safe = False
else:
slip_tendency = shear_tau_mpa / sigma_n_eff_mpa
slip_safe = slip_tendency < friction_mu_f
return {
"folio": "E.13",
"biot_alpha": round(biot_alpha, 3),
"skempton_b": round(skempton_b, 3),
"poroelastic_stress_path_eta": round(eta_poro, 3),
"sigma_h_mpa": round(sigma_h_mpa, 2),
"fault_normal_stress_mpa": round(sigma_n_mpa, 2),
"fault_shear_stress_mpa": round(shear_tau_mpa, 3),
"fault_effective_normal_stress_mpa": round(sigma_n_eff_mpa, 2),
"slip_tendency": None if slip_tendency is None else round(slip_tendency, 3),
"critical_delta_p_mpa": round(critical_delta_p_mpa, 2),
"slip_margin_mpa": round(slip_margin_mpa, 2),
"tensile_margin_mpa": round(tensile_margin_mpa, 2),
"tensile_safe": tensile_safe,
"slip_safe": slip_safe,
"poroelastic_fault_pass": tensile_safe and slip_safe,
}
def _check_bounds_rejections() -> bool:
invalid_cases = (
dict(drained_bulk_kd_gpa=40.0, solid_grain_ks_gpa=36.0),
dict(fluid_bulk_kf_gpa=72.0),
dict(porosity_phi=1.0),
dict(drained_poisson_nu=0.5),
dict(alpha_fault=0.0),
dict(delta_p_inj_mpa=float("nan")),
)
for kw in invalid_cases:
try:
evaluate_biot_poroelastic_fault_slip(**kw)
return False
except ValueError:
pass
return True
def run_verification(planted_defect: bool = False) -> dict[str, Any]:
nominal = evaluate_biot_poroelastic_fault_slip(planted_defect=planted_defect)
co2_fluid = evaluate_biot_poroelastic_fault_slip(fluid_bulk_kf_gpa=0.20, planted_defect=planted_defect)
basement = evaluate_biot_poroelastic_fault_slip(stress_ratio_k0=0.60, delta_p_inj_mpa=4.5, planted_defect=planted_defect)
pre_inj = evaluate_biot_poroelastic_fault_slip(stress_ratio_k0=0.56, delta_p_inj_mpa=0.0, planted_defect=planted_defect)
overpressure = evaluate_biot_poroelastic_fault_slip(delta_p_inj_mpa=11.0, planted_defect=planted_defect)
tensile = evaluate_biot_poroelastic_fault_slip(delta_p_inj_mpa=22.0, planted_defect=planted_defect)
reverse = evaluate_biot_poroelastic_fault_slip(stress_ratio_k0=1.20, fault_angle_beta_deg=5.0, delta_p_inj_mpa=32.0, planted_defect=planted_defect)
terzaghi = evaluate_biot_poroelastic_fault_slip(drained_bulk_kd_gpa=1e-4, fluid_bulk_kf_gpa=36.0, planted_defect=planted_defect)
checks = {
"nominal_biot_alpha_0_667": nominal["biot_alpha"] == 0.667,
"nominal_skempton_b_0_394": nominal["skempton_b"] == 0.394,
"nominal_eta_poro_0_444": nominal["poroelastic_stress_path_eta"] == 0.444,
"nominal_slip_tendency_0_404": nominal["slip_tendency"] == 0.404,
"nominal_critical_dp_9_40": nominal["critical_delta_p_mpa"] == 9.40,
"nominal_margins_pass": nominal["slip_margin_mpa"] == 4.90 and nominal["tensile_margin_mpa"] == 11.50 and nominal["poroelastic_fault_pass"],
"co2_skempton_b_0_053": co2_fluid["skempton_b"] == 0.053,
"basement_k0_0_60_slips": (not basement["slip_safe"]) and basement["critical_delta_p_mpa"] == 0.57 and basement["slip_tendency"] == 0.825,
"pre_injection_k0_0_56_unstable": (not pre_inj["slip_safe"]) and pre_inj["critical_delta_p_mpa"] < 0.0,
"overpressure_11mpa_slips": (not overpressure["slip_safe"]) and overpressure["slip_margin_mpa"] < 0.0,
"tensile_22mpa_hydraulic_breach": (not tensile["tensile_safe"]) and tensile["slip_tendency"] is None,
"reverse_fault_overburden_tensile_breach": (not reverse["tensile_safe"]) and reverse["tensile_margin_mpa"] < 0.0,
"terzaghi_incompressible_limit": terzaghi["biot_alpha"] > 0.999 and terzaghi["skempton_b"] == 1.0,
"invalid_bounds_raise_value_error": _check_bounds_rejections(),
}
ok = all(checks.values())
return {
"status": "PASS" if ok else "FAIL",
"folio_id": "E.13",
"planted_defect": planted_defect,
"nominal": nominal,
"co2_skempton_b": co2_fluid["skempton_b"],
"basement_k0_0_60": {
"slip_tendency": basement["slip_tendency"],
"critical_delta_p_mpa": basement["critical_delta_p_mpa"],
"slip_safe": basement["slip_safe"],
},
"checks": checks,
}
def main(argv: list[str] | None = None) -> int:
parser = argparse.ArgumentParser(description="Verify Folio E.13 Biot 3D Poroelasticity & Fault Slip Margin.")
parser.add_argument("--planted-defect", action="store_true", help="Substitute matrix alpha for alpha_fault on fault plane (must fail)")
parser.add_argument("--json", action="store_true", help="Pretty-print JSON output")
args = parser.parse_args(sys.argv[1:] if argv is None else argv)
report = run_verification(planted_defect=args.planted_defect)
print(json.dumps(report, indent=2 if args.json else None))
return 0 if report["status"] == "PASS" else 1
if __name__ == "__main__":
raise SystemExit(main())
Edition history & reviewPublished 2026-11-20 · Updated 2026-11-20 (REV 1.0)
REV 1.0 (Published 2026-11-20): Volume VII Civil & Geomechanical Engineering monograph continuing Folios E.01 & E.05 via Biot 3D poroelasticity (1941), Skempton & Rice–Cleary undrained pore-pressure coupling (1954, 1976), and Mohr–Coulomb fault slip stability across the Zoback–Gorelick (2012) vs. Vilarrasa–Carrera (2015) geologic CO2 storage debate.
Verification note: all eight DOIs in this folio were checked against Crossref and the Scite index on 2026-11-20 with zero retraction notices; all numerical outputs are recomputed offline by skills/engineering/e13/verify_e13_biot_poroelasticity.py and represent illustrative closed-form model outputs under uncoupled total horizontal stress rather than field measurements.